株洲鑫碩新型新材料有限公司，品牌為SIEESO硬質合金廠，是切削工具和硬質合金材料的專業製造商。自Sieeso成立以來，它一直專注於高品質切削刀具和硬質合金材料的設計和製造。擁有數千種不同種類的物品和大量庫存。 Sieeso 擁有擁有先進設備和儀器的工具和材料關鍵產品線。

我們50%的產品為世界級切割公司提供OEM項目，50%作為我們自己的品牌。我們的產品已銷往世界各地，如俄羅斯、土耳其、歐洲、美國、墨西哥、越南、泰國、印度、馬來西亞等。

              New Stainless Steel Grade Carbide Insert WNMG080408

The economical WNMG 080408 is a double sided 80° Trigon insert, with a 8mm cutting edge length and is approximately 4mm in thickness.  The corner radius (04) is the most commonly used due to its versatility to provide a balance of both strength and excellent finishes.

---Description:

ISO Code: WNMG0804004/08/12 HS7225

Dimension (inch): L=0.343, I.C.=0.500, S=0.187, d=0.203, r=0.031

Workpiece Material (ISO): Steels (P10-P35)/stainless steel/cast iron

Application: This insert is recommended for general-purpose turning machining of steels.

Chip Breaker: Flat \Through Type

Coating:Thick TiCN + thick Al2O3 coating on carbide, a grade of Black Diamond Series For Steel Machining

Grade: HS8125/6120/7225/5120/5130

Comprising of thick TiCN and thick Al2O3 coatings, the grade has high capability against plastic deformation and good hardness of cutting edge. It is preferred grade for machining of steel from finishing to roughing. Under the same cutting conditions, the cutting speed can be increased by more than 25%, while the tool life can be 30% longer under the same cutting speed.

---Advantages:

--Cutting edge inclination designation is good to control chip flow direction and obtains excellent surface quality

--sharp cutting edge, small cutting force

--good machining surface quality

--special chipbreaker design to keep cutting edge sharp and safe

---Application:

---Products Pictures:

工廠圖片:

聯繫我們：

株洲鑫碩新型新材料有限公司

工廠添加: 中國湖南省株洲市黃河南路209號一廠郵編: 412007

營銷辦公室:中國湖南省株洲市泰山西路九壩地景城702號郵編：412007

電話：+86-18675856108(Whastapp)

傳真：0731-22481019
電子郵件:info@sieeso.com

微信:alicewang0826